Showing 1–17 of 28 results
-
-
HB5/EV
Details
The equipment enables to study the Bernoulli’s theorem through the use of a classical Venturi tube equipped with 6 static tapping points and a Pitot tube […]
-
-
-
HB19/EV
Details
The unit contains a Venturi tube made of a transparent acrylic material and has been designed to study the characteristics of the phenomenon called cavitation.
-
-
-
HB2/EV
Details
The module enables to determine the hydrostatic thrust caused by a fluid on a submerged surface. It consists of a Plexiglas box containing a toroidal shaped […]
-
-
-
HB18/EV
Details
The module consists of a pump equipped with two pressure gauges and of an inverter. This enables to vary the number of pump rotations and to […]
-
-
-
HB1/EV
Details
This equipment enables to calibrate a Bourdon tube gauge by applying prefixed pressures.
-
-
-
HB16F/EV
Details
The equipment consists of a miniature Francis turbine mounted on bearings. The power produced by the turbine can be measured through a dynamometer. The front face […]
-
-
-
HB16K/EV
Details
The equipment consists of a miniature Kaplan turbine mounted on bearings. The power produced by the turbine can be measured through a dynamometer. The front face […]
-
-
-
HB16/EV
Details
The equipment consists of a miniature Pelton turbine with spear valve and mounted on bearings. The power produced by the turbine can be measured through a […]
-
-
-
HB13/EV
Details
This equipment enables to calculate the energy losses on some elements of a hydraulic circuit such as bends, sudden contractions and enlargements, control valves, etc
-
-
-
HB9/EV
Details
The equipment enables to measure the head loss of a liquid flowing through a circular pipe. It consists of a test pipe, oriented vertically, which may […]
-
-
-
HB10/EV
Details
This module enables to study the characteristics of flow in an open channel.
-
-
-
HB3/EV
Details
The module enables to evaluate the characteristics of flow over weirs with different shapes. It consists of 4 weir elements that can be placed at the […]
-
-
-
HB8/EV
Details
This module consists of a cylindrical tank with an orifice fitted in the base that enables to study the outlet flow.
-
-
-
HB7/EV
Details
The equipment is composed of a graduated tank with constant level on whose base two discharge orifices with different diameter can be installed.
-
-
-
HB21/EV
Details
The module is used to study fluid friction losses through pipes of different diameters, valves and flow metering devices (Venturi tube, orifice plate and Pitot tube).
-
-
-
HB14/EV
Details
The equipment has been designed to study the characteristics of free and forced vortices inside a cylinder of acrylic material.
-
-
-
HB15/EV
Details
The equipment has been designed to study the characteristics of the effect of the water hammer
-
