Showing 1–17 of 20 results
-
-
TE22/EV
Details
This equipment consists of two separate, transparent cylinders full of air. Air is compressed in the cylinder on the left and air is heated in the […]
-
-
-
TE6D/EV
Details
A hot surface loses heat to its surroundings by the combined modes of convection and radiation. This module enables to analyze the combined effects of convection […]
-
-
-
TE6PC/EV
Details
This equipment is provided with: 12 inputs for TC and 4 analog inputs; two adjustable outputs in Volts and another output fixed at line voltage. Unlike […]
-
-
-
TE11/EV
Details
This apparatus consists of a rotary calorimeter, driven by a variable speed motor. The calorimeter is composed by a metal cylinder, filled with water, and wrapped […]
-
-
-
TE5/EV
Details
This equipment has been designed to study basic thermodynamic processes with air as working fluid; it consists of two interconnected transparent tanks that are respectively pressurized […]
-
-
-
TE6E/EV
Details
A long horizontal rod, which is heated at one of its ends, is used as extended surface for measurements of heat transfer. A set of thermocouples […]
-
-
-
TE6H/EV
Details
This unit consists of a centrifugal fan with vertical discharge duct in which three different types of heating surfaces can be inserted: flat surface, cylindrical pins […]
-
-
-
TE6/EV
Details
This unit can be connected with a series of interchangeable accessories to study the modes of heat transfer (conduction, convection and radiation) and it ensures the […]
-
-
-
TE6A/EV
Details
This equipment has been designed to study Fourier’s equation in a one-dimensional system in steady-state conditions.
-
-
-
TE9/EV
Details
Mahler bomb calorimeter enables to measure the heat of combustion of a lot of solid and liquid substances. The heat resulting from the combustion reaction of […]
-
-
-
TE8/EV
Details
This equipment enables to measure the flash point (up to 370°C) of distilled oils (diesel fuel, kerosene), fuel oils, lubricating oils, etc… The used method is […]
-
-
-
TE2/EV
Details
This unit has been designed to study pressure measuring techniques and the modes of calibration of the relevant sensors. Using a deadweight tester will enable to […]
-
-
-
TE6B/EV
Details
This equipment has been designed to study radial heat conduction in steady-state condition and it mainly consists of a metallic disk provided with temperature sensors arranged […]
-
-
-
TE6F/EV
Details
A set of thermocouples is used in this equipment to measure the temperature of the air fl ow crossing the centre of a duct while the […]
-
-
-
TE6C/EV
Details
This equipment has been designed to demonstrate the laws of heat transfer by radiation coming from a light source and from a heat source. It consists […]
-
-
-
TE4/EV
Details
This unit has been designed to explain the principle of recirculation and to carry out mass and energy balances in steady-state or unsteady-state conditions. This is […]
-
-
-
TE3/EV
Details
This unit consists of a Marcet boiler that enables to analyze the correlation between water temperature and pressure and to compare the experimental data with those […]
-
