RF instruments tower

OSCILLOSCOPIO A MEMORIA DIGITALE

• 100MHz 2 Channels
• Display: 8” TFT SVGA Display
• Virtual Screen: virtual Display
• Memory Zoom
• Visualization: Time domain, Frequency domain (FFT), voltage (XY)
• Input sensibility: 1mV/Div to 10V/Div
• Max input voltage: 300Vrms, CAT I
• Auxiliary input: external trigger
• BW limiter: 20MHz
• Triggering: Edge, Pulse Width, Video, Pulse Runt, Rise & Fall (Slope), Alternate, time out , Event Delay, Time Delay
• Sampling Rate: 2 x 1 GS/s, 1 x 2 GS/s

ANALIZZATORE DI SPETTRO CON GENERATORE DI TRACKING

• Frequency Range: 9 kHz to 3 GHz
• Display: 8.4” TFT VGA Display
• Tracking Generator: up to 0dBm
• In/Out: N connectors, 50 Ohm
• Amplitude Measurement Range: +20dBm max
• Amplitude Range: log (0.5 to 10dB/Div) or linear
• Amplitude Unit: dBm, dBmV, dBuV, V, W
• Automatic or manually selectable: sweep time, RBW and VBW
• Sweep Time: 0.2ms to 1000s, single/continuous with int/ext trigger
• Frequency Counter resolution: 1Hz
• Resolution Bandwidth: 1 Hz to 1 MHz
• Spectral Purity: <-100dBc/Hz (@100kHz)
• Video Bandwidth: 1 Hz to 1 MHz
• Integrated AM and FM Demodulator with Phone and Speaker
• Detectors: Auto/Min/Max-Peak, Sample, RMS, Quasi-Peak
• Markers with Delta Marker, miscellaneous Peak Functions
• Limit lines: upper/lower limits with selectable beep/message
• Interface: DVI Output for ext monitor, USB/RS232 for MassStorage/Printer/Remote Control, Ethernet port

COUNTER UNIVERSALE / FREQUENZIMETRO

•  Frequency range: 0 Hz to 3 GHz
• 400 MHz time base
• 0.5 ppm stability with TCXO component
• Sensitivity:
• – up to 1 GHz: 30 mVrms (typ. 20 mVrms)
• – 1…3 GHz: 100 mVrms (typ. 80 mVrms)
• Time interval resolution: from 10ns to 0.1 ps

GENERATORE DI FUNZIONI

• Frequency range: 1 µHz to 20 MHz
• Output voltage: 10 Vpp max with 50 Ohm
• Waveforms: Sine, Square, Triangle, Ramp, Pulse, Noise, Harmonic, DC
• Surge&short circuit proof output

ACCESSORI

• 2x 100MHz Probe
• 2x N-to-BNC 50 Ohm adapter
• 1x telescopic antenna
• 2x 0.5m coax test cable
• 2x 1m coax test cable
• 1x BNC-to-4mm banana adapter
• Display Memory: 2 x 1 MPts, 1 x 2 MPts
• Frequency Counter: 6 Digit resolution
• Auto measurements: amplitude, frequency, period, pulse count, … 36 automatic measurement sets
• Cursor measurements
• Interface: Output for ext monitor, 2xUSB/RS232 for MassStorage/Printer/Remote Control, Ethernet port