Dynamic mechanics - Elettronica Veneta S.p.A.

Showing 1–17 of 23 results

- Air-cushion rail with digital timer
- ROT-1T/EV
  Details
  This aluminium rail of triangular section is 2-metre long and is used to carry out tests on the laws of motion, velocity, acceleration and momentum.
- Discover
- Air-cushion rail with photogate sensors
- ROT-1/EV
  Details
  This aluminium rail of triangular section is 2-metre long and is used to carry out tests on the laws of motion, velocity, acceleration and momentum.
- Discover
- Air-cushion rail with sonar
- ROT-2/EV
  Details
  This aluminium rail of triangular section is 2-metre long and is used to carry out tests on the laws of motion, velocity, acceleration and moment.
- Discover
- Atwood’s machine
- F-ATW/EV
  Details
  Atwood’s machine enables to study the fall of a body subject to a constant force, but at low speed so that friction of the air is […]
- Discover
- Ballistic pendulum
- F-PB/EV
  Details
  The kit includes a projectile launcher, a rigid physical pendulum, a steel ball, a release mechanism, a light barrier and a digital counter.
- Discover
- Computer determination of gravitational constant via Cavendish balance
- F-CAV/EV
  Details
  Cavendish balance is a torsion pendulum where an arm of light aluminium with 2 spheres of 15 g on its ends is hanging at its center […]
- Discover
- Computer kit for laws of motion
- F-MOT/EV
  Details
  The device was designed to study and experiment the Laws of Motion by Newton. Through the datalogger and software, you can perform the experiments on a […]
- Discover
- Equipment for studying centrifugal force
- F-FCF/EV
  Details
  The equipment for studying centrifugal force consists of a rail where a low-friction truck can slide. Knowing the speed of rotation of the equipment, the force […]
- Discover
- Equipment for studying free fall
- F-GRAV/EV
  Details
  The device measures the fall time of a sphere according to the height and with a digital timer. Accurate and easy-to-use and assemble. It includes a […]
- Discover
- Equipment for studying free fall and Atwood’s machine
- F-GFALL/EV
  Details
  This apparatus consists of a vertical stand of aluminium where the various system configurations can easily be assembled. Uniformly accelerated motion, fall with viscous friction, oscillatory […]
- Discover
- Equipment for studying rotational motion
- ROTS/EV
  Details
  This system enables to carry out a wide range of tests on centrifugal force, on angular momentum and on rotational motion. Provided with a unique set […]
- Discover
- Equipment for the study of mechanical waves
- F-OM/EV
  Details
  In this experiment, the spring or the rope which are fixed at one end. The other end is connected to a vibration generator positioned at a […]
- Discover
- Forced oscillations and resonance
- F-OSC/EV
  Details
  A mechanical system including a mass and a spring can oscillate following its natural simple harmonic motion, or it can be forced to oscillate.
- Discover
- Gyroscope for determining the moment of inertia
- F-GIR/EV
  Details
  High quality precision-made gyroscope for demonstration as well as for quantitative determination of gyroscopic laws by means of practical experiments.
- Discover
- Hooke’s law and mechanical tests on materials
- F-HO/EV
  Details
  This test will demonstrate the validity of Hooke’s law by using two helical springs with different elastic constant. Furthermore, the equipment enables to determine the elastic […]
- Discover
- Hooke’s law apparatus
- F-HK/EV
  Details
  Confirmation of Hooke’s law and determination of the stiffness index for five different coil springs.
- Discover
- Kater’s reversible pendulum
- F-KAT/EV
  Details
  The pendulum is suspended from very low-friction needle bearings on a stable support. To adjust horizontal orientation, the support is equipped with two adjustment screws and […]
- Discover