Modules - Elettronica Veneta S.p.A.

Showing all 17 results

- Box of tools and workpieces – air service unit
- ATZ/EV - SRA/EV
  Details
  The Air service unit mod. SRA/EV for the pneumatic supply of mechatronic systems consists of a filter and a pressure regulator with manometer equipped with a […]
- Discover
- Cartesian control storage module
- MCE-620/EV
  Details
  Mod. MCE-620/EV stores pieces according to the type of material they are made of. The movement is carried out through a 3-axis Cartesian system for picking […]
- Discover
- Conveyor and multiple selection module
- MCE-705/EV
  Details
  Mod. MCE-705/EV transfers pieces on a conveyor belt, identifying and sorting them according to the type of material (plastic / aluminum). The conveyor is driven by […]
- Discover
- Conveyor module
- MCE-700/EV
  Details
  Mod. MCE-700/EV transfers pieces along one axis, in the two directions. The conveyor is driven by a DC motor, controlled by direct/reverse-acting relays that operate the […]
- Discover
- Drilling station module
- MCE-600/EV
  Details
  Mod. MCE-600/EV is a drilling station. It consists of a column drill fixed on a pneumatic skid moving it up and down. The piece to be […]
- Discover
- Linear storage module
- MCE-530/EV
  Details
  Mod. MCE-530/EV stores pieces according to the type of material they are made of. Pieces are conveyed by a trolley moving along an axis and stopping […]
- Discover
- Pick&place module
- MCE-710/EV
  Details
  Mod. MCE-710/EV transfers pieces on a circular area. It includes a cylinder for up/down movements, a second cylinder for forward/backward movements, a suction cup to hold […]
- Discover
- Piece identification and distribution module
- MCE-500/EV
  Details
  Mod. MCE-500/EV allows to recognize and distribute cylindrical pieces according to their material. A piston pushes the pieces from a vertical ramp to an identification cell. […]
- Discover
- Piece thickness measurement module
- MCE-520/EV
  Details
  Mod. MCE-520/EV allows to sort pieces according to their thickness. The measurement is carried out by a sensor whose output voltage is an analog signal between […]
- Discover
- Prismatic pieces feeding module
- MCE-740/EV
  Details
  Mod. MCE-740/EV is used to distribute prismatic pieces. It has been designed to work with the conveyor module MCE-700/EV. Pieces are expelled by a double-acting cylinder […]
- Discover
- Pushbutton panel – silenced compressor
- PULS/EV
  Details
  The pushbutton panel for the control of stations mod. PULS/EV is linked directly to the PLC mod. PLC-V7/EV and mod. PLC-V8/EV through 16 safety terminals Ø=2 […]
- Discover
- Robotic arm
- NDIDA/EV
  Details
  The NDIDA/EV robotic arm is designed for take and release of a piece in different positions. It consists on a series of stepper motors that moves […]
- Discover
- Rotary arm module
- MCE-590/EV
  Details
  Mod. MCE-590/EV transfers the piece from a modular station to the next one. It consists of a manipulator with a double effect cylinder for the up/down […]
- Discover
- Rotary indexing table module
- MCE-570/EV
  Details
  Mod. MCE-570/EV is composed by a rotary table where the pieces to be identified are placed. A set of three sensors (capacitive, inductive and optical) determines […]
- Discover
- Swivel arm module
- MCE-510/EV
  Details
  Mod. MCE-510/EV transfers pieces from a modular station to the next one. It consists of a rotary pneumatic cylinder adjustable within a 180° angle. The transfer […]
- Discover
- Test and selection module
- MCE-720/EV
  Details
  Mod. MCE-720/EV is used to test and select pieces, and it has been designed to work with the conveyor module MCE-700/EV. It consists of two cylinders […]
- Discover
- Weighing module
- MCE-730/EV
  Details
  Mod. MCS-730/EV is used to weigh pieces. After placing an object on the measurement area, the sensor provides an analog signal in Volts depending on the […]
- Discover